Motion

This dual bearing plate holds two V-Groove Bearings (REV-29-1014) to create an easy linear motion system for the ION Build System 1in Extrusion (REV-21-1000). Using a combination of Concentric (REV-21-1030) and Eccentric (REV-21-1029) bushings, the user...

Concentric bushings are used to hold our V-Groove Bearings (REV-29-1014) for linear motion applications. Used in conjunction with our Eccentric Bushing (REV-21-1029), the user can adjust how tight or loose they would like to tune their linear...

1.2mm UHMWPE Cord - 10M (REV-41-1162) is a high strength string for use with the small Pulley Bearings and the 15mm Linear Motion Kit to create a powered lift.   3mm UHMWPE Cord - 10m (REV-29-1244) is a high-strength and low-stretch...

These spare parts are designed specifically for the 4in EasySwerve Module (REV-21-3006). These replacement base plate and cover components make servicing and maintenance simple. Routine replacement of worn or damaged parts helps preserve performance,...

Complete gear set replacement for the Smart Robot Servo V2. Documentation Smart Robot Servo V2 Overview Smart Robot Servo V2 - Balanced Gear Replacement Guide

The Aluminum Servo Horn V2 is compatible with the REV Smart Robot Servo and any other servos with a standard 25T spline. Updates from the original Aluminum Servo Horn include additional tapped M3 Holes for more mounting options, 6 M3 Clearance Holes...

The Rounded UltraHex Shaft is compatible with the REV ION System and allows teams to adapt the REV 5mm Hex Shaft family of products to 0.5in Hex applications. It can also be used as a coupler to extend 5mm Hex shafts. Rounded UltraHex...

An individual cartridge for the MAXPlanetary System. This cartridge is a 2:1 gear reduction. The 2:1 cartridge expands MAXPlanetary ratio options, joining the 1:1 (no cartridge), 3:1, 4:1, 5:1, and 9:1 cartridges. With the addition of 2:1, teams can...

The REV Hub Adapter MAXSpline to 1/2in Hex makes it fast and easy to convert MAXSpline based wheels, sprockets, and other ION components to a standard 1/2in hex drive interface. Designed for flexibility and ease of use, these split adapters press...

These spare parts are designed specifically to self service and maintain your 3in MAXSwerve Module (REV-21-3005). Created for efficient repairs and upkeep, routinely servicing your 3in MAXSwerve Module with spare parts will enhance performance and...

The Stepped Bushing - 3/4in ID is compatible with the REV ION System. This bushing used in conjunction with the MAXSpline Shaft and Dead Axle Tube - 3/4in can be used to build robust and effective rollers and intakes. Specifications ...

With the 8mm to 1/2in Hex Adapter you can convert 8mm keyed shafts to drive 0.5in hex bore wheels, sprockets, gears, and more! Use these with any motors with a 8mm round keyed output shaft, like the NEO Brushless...

Commonly included with our gearboxes and pinion options, the 8mm Keyed Shaft Retaining Hardware Pack is compatible with the REV ION System and includes the hardware needed to retain 2mm keyed elements to 8mm OD shafts without the bulk of alternative...

The ION Motor Mounting Blocks family offers two options for securely mounting motors and supporting extended shafts within robot mechanisms. Both versions use aluminum plates with integrated MAXSpline bores and bearing pockets, providing a consistent...

The 4in Spiky Wheel Tread 8 Pack provides replacement treads for teams using the 4in Spiky Wheels on their EasySwerve-equipped robots. These injection molded TPU treads feature an aggressive spiked geometry designed to maximize traction on FRC carpet...

The 8mm Shaft Spacer is a stainless steel 1/16 inch washer designed for precise shaft spacing in FRC and FTC mechanisms. Used on the NEO 2.0 Brushless Motor to achieve correct input coupler alignment in MAXPlanetary assemblies, this spacer also fits any...

The 4in Spiky Wheel Aluminum Hub is a precision machined and balanced wheel hub designed for use with the 4in Spiky Wheel system and the 4in EasySwerve Module. Built from 6061 aluminum, this hub provides a strong and reliable foundation for high-traction...

The MAXPlanetary Universal Input Stage V2 is a redesigned mounting solution for integrating a wide range of FRC motors into the MAXPlanetary System. Built as the next evolution of the original universal input stage, V2 enhances strength, expands motor...

MAXSpline Shaft Collars provide mechanical retention for components mounted on MAXSpline Shaft and use a two piece aluminum clamping design for secure attachment. Both versions are black anodized for durability and integrate cleanly within the REV ION...

The ION Round Belt System provides a simple and adaptable way to transfer power in compact robot mechanisms. Designed around a 2in outer diameter when the belt is installed, the system stays on pitch with the REV ION wheel lineup, making it easy to...

The ION Conveyor Brush System is a customizable solution for creating wide to narrow intake brushes that adapt to a variety of game pieces. The 24in brush can be cut to any length using a bandsaw or hacksaw, allowing teams to fine tune coverage and...

The 4in Spiky Wheel - Hub and Tread Bundle includes everything needed to outfit a full 4in EasySwerve drive with high-traction 4in Spiky Wheels and a complete set of replacement treads. The bundle contains four (4) precision machined aluminum hubs, eight...

The 4in EasySwerve Module is designed to bring truly accessible swerve drive performance to every FRC team. Built for simplicity, durability, and broad motor compatibility, EasySwerve removes many of the traditional barriers associated with adopting...

ION Flap Wheels are designed for intakes and conveyance that need reliable performance when interacting with irregular or variable gamepieces. Similar to compliant wheels, they provide a flexible interface, but their flap-based design introduces...

The MAXPlanetary MAXSpline Output Coupler [REV-21-3630] provides a compact and reliable way to interface a MAXPlanetary Gearbox’s 1/2 inch hex output with MAXSpline Shaft systems. Designed for teams who want the packaging efficiency of a...

The Locking MAXHub - 1/2in Hex Kit is a compact, dual plate hub system designed to secure 1/2in hex shafting inside any MAXSpline bore component. Each kit includes two identical wedge locking plates and the necessary #10-32 hardware. When the plates are...

REV ION Cone Wheels are designed to give teams controlled, predictable vectoring for game pieces and objects. Their tapered profile naturally guides items toward the smaller diameter, making them especially effective in intake edge zones and in-feed...

The Locking Shaft Collar MAXSpline is a compact, purpose built clamping solution for securing components to a MAXSpline shaft. Designed as a thin aluminum plate, it can be paired with a second collar or mounted directly to any MAXSpline wheel or sprocket...

The Vortex Shaft - 20DP Gear - 8T is compatible with the REV ION System and offers users the unique ability to achieve substantial gear reductions directly from the motor. This gear features a 8T 20DP design that is typically too small for an 8mm keyed...

20DP Gears are compatible with the REV ION System and come in a wide range of sizes and bores. This gear features a 15T spline bore for use with 15T spline shaft and motors like our NEO 2.0 Brushless Motor. A notch on the bore provides an easy visual...

The 15T Spline Shaft is a solid stainless steel shaft sized at 480mm for long span applications or to be used as stock to cut custom length shafts. Its 15 tooth involute spline profile features an 8mm outer diameter and interfaces with the REV ION...

The 15T Spline to 1/2in Hex Adapter provides a simple and reliable way to integrate motors with a 15T spline output shaft into mechanisms designed around 1/2in rounded hex. This adapter is ideal for teams looking to pair the NEO 2.0 Brushless Motor...

The MAXPlanetary 1:1 Brake Cartridge is a drop-in, self-contained module that instantly adds a reliable bi-directional unpowered hold for any MAXPlanetary gearbox. Designed around the principles of a sprag clutch, sometimes referred to as a torque diode,...

MAXSpline Bearing Blocks are compatible with the REV ION System. Quickly add bearing support to any location on REV ION extrusion without the need for precision machining. Can also be used in a west coast style drivetrain to add center wheel drop while...

These MAXPlanetary Input Couplers are compatible with the REV ION System. The MAXPlanetary 1/2in Hex Input Coupler (REV-21-2110) attaches to the end of a hex shaft, securely held in place by a screw, enabling the MAXPlanetary to be powered by a hex shaft...

MAXSpline Shaft Endcaps are compatible with the REV ION System and transform your MAXSpline Shaft extrusion into a live axle driven by a 1/2in Hex shaft. MAXSpline Shaft Endcaps come in two different materials: a durable plastic version and an upgraded...

#10-32 Ball Joint Rod Ends are compatible with the REV ION System. Right-hand threaded rod ends tighten when turned clockwise while left-handed threaded rod ends tighten when turned counterclockwise.  Specifications Type: Stud-type Rod...

The MAXSpline Shaft Bearing Block Kit and MAXSpline Bearings are compatible with the REV ION System and are perfect for using MAXSpline Shaft in a live axle application or any other similar sized rotational needs. Effortlessly mounting to REV's hole...

MAXHubs are compatible with the REV ION System and provide a way to transfer torque to a MAXSpline bore from shafts of various shapes and sizes. Other hub variants allow for other bores or mount holes to populate within an existing MAXSpline...

1/2in Hex Shaft Spacers are compatible with the REV ION System and can be used on the shaft as a spacer; they also work as spacers between wheels and sprockets, etc. Specifications Material: POM (Acetal/Delrin) OD: 0.72in Weights & Dimensions: ...