Competition

The REV Robotics Expansion Hub is a low-cost educational device that can communicate with any computer (commonly the REV Robotics Control Hub or an Android Phone) to provide the interfaces required for building robots and other mechatronics. The...

The Servo Power Module is a 6V 90W power injector that enables the use of high-power RC servos in applications where a robot controller cannot directly provide adequate power.  The Servo Power Unit passes through input signals unaltered while...

This 10-cell, 12V 3000mAh battery has a low profile configuration to make it easier to mount on a robot. The Slim Battery pack is wired with an XT30 male connector and an inline 20A replaceable ATM fuse. XT30 to Tamiya Adapter no longer automatically...

The REV Robotics Smart Robot Servo (SRS) is a configurable metal-geared servo that takes the guesswork out of aligning and adjusting servo based mechanisms. One SRS can be used as a standard angular servo, a custom angular servo, and a continuous...

REV 45mm x 15mm C Channel has a 45mm x 15mm rectangular profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsional strength is required. The 45mm wide side of the channel...

REV 45mm U Channel has a 45mm x 45mm square profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsion strength is required. On the sides of the channel is the Extended Motion...

REV 45mm U Channel has a 45mm x 45mm square profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsion strength is required. On the sides of the channel is the Extended Motion...

The HD Hex series motors and gearboxes feature integrated encoders and power that plug right into the Control Hub (REV-31-1595) and Expansion Hub (REV-31-1153). The gearbox options feature 5mm Hex output or coupler making it easy to connect gears,...

This product has been discontinued as of 07/15/2024 and replaced with (REV-31-2983) REV USB PS4 Compatible Gamepad. The Etpark Wired Controller is a legal gamepad for the FIRST Tech Challenge program. This controller...

The NEO 550 Brushless Motor is a member in the NEO family of brushless motors. Its output power and small size are specifically designed to make NEO 550 the perfect motor for intakes and other non-drivetrain robot mechanisms. Mounting holes and pilot...

REV Building System also comes in a 15mm x 30mm square extrusion. The slots are designed to fit standard M3 hardware rather than expensive t-nuts. Use the 15mm x 30mm extrusion when more strength is needed for an application. Features All holes can be...

The REV Through Bore Encoder is specifically designed with the end user in mind, allowing teams to place sensors in the locations closest to the rotation that they wish to measure. This rotary sensor measures both relative and absolute position through...

The NEO Brushless Motor is the first brushless motor designed to meet the unique demands of the FRC community. NEO offers an incredible power density due to its compact size and reduced weight. As it is designed to have similar performance...

The Core Hex Motor is a FTC legal motor that features a 90 degree orientation and a female output shaft for maximum flexibility and ease of use. Insert any REV standard 5mm hex shafts into or through the Core Hex motor to create custom length...

The REV 4-Pin JST to PWM Sensor Adapter Cable allows for seamless connection of REV Robotics Sensors like the Magnetic Limit Switch and Potentiometer to the FRC Control System. Please note that this cable will not work for I2C type sensors. REV...

This 5V WS2812B Addressable RGB LED Strip is compatible with the REV Blinkin LED Driver (REV-11-1105). Each LED contains an integrated driver IC and three LEDs; a red, green, and blue LED. Each individual LED can be controlled to create colorful patterns...

This Servo Shaft Adapter makes it possible to drive a 5mm hex shaft with any 25T output servo including the Smart Robot Servo. The adapter attaches to the servo spline like any common servo horn and accepts a 5mm hex shaft on the opposite end. This...

Reliability meets convenience for FTC teams! The HD Hex series motors and gearboxes all features integrated encoders and power that plug right into your REV Expansion Hub or Control Hub. Our gearboxes all feature a 5mm hex output shaft makes it easy to...

The REV Robotics SRS Programmer is the key to unlocking all the smart features of the (SRS) Smart Robot Servo (sold separately). Switching between continuous rotation, standard servo, and custom angular modes is easy as pressing a button. The...

Reliability meets convenience for FTC teams! The HD Hex series motors and gearboxes all features integrated encoders and power that plug right into your REV Expansion Hub or Control Hub. Our gearboxes all feature a 5mm hex output shaft makes it easy to...

High-strength and low-stretch cord that is ideal for actuating lifts and other linear mechanisms. Also known as Spectra or Dyneema, this cord type minimizes the need for adjustments and re-tensioning after first assembly due to its low-stretch properties...

These are the same inserts that are included with the Through Bore Encoder.  Specifications Weight(s):  3/8in Hex: 23.5g (0.051lbs) 5mm Hex: 24.0g (0.052lbs) 1/4in Round: 24.0g (0.052lbs) Kit Contents QTY 1 - 3/8in Hex to 1/2in Hex...

The Universal Hex Adapter V2 is a steel hub that allows teams to quickly and easily adapt their existing parts to work with 5mm hex.  Specifications Material: Sintered Steel Hole Pattern: Four M3 tapped holes on a 0.630in (16mm) diameter circle -...

This metal Hex Bearing Block is used with the REV DUO 15mm Extrusion and REV DUO Channel. A hex ball bearing is pre-pressed into the metal bracket. Specifications Material: Sintered Steel, Steel CAD & Drawings SKU-STP REV-41-1683 Onshape SKU-DR

Timing belts and pulleys are compatible with the REV DUO System. They are lighter and can be more efficient than chains and sprockets. Tensioning and adjustment are a thing of the past. 24 Tooth through 60 Tooth size pulleys come with two ends and an...

Metal sprockets designed to work in high-load applications with #25 chain. Specifications Chain Size: #25 Material: Sintered Steel CAD & Drawings REV-41-1716 STEP File REV-41-1716 Onshape REV-41-1716 Drawing

M3 Hex Cap Screws are compatible with the REV DUO System. Length measured from tip to underside of hex cap. Specifications Material: Corrosion Resistant Zinc Plated Steel Thread Pitch: M3 x 0.5 Head Dimensions: 5.5mm Hex Width, 2mm Height...